Benson
Well-known member
So converted the Shimano driver to XD on a Specialized freehub (Formula XD S192100006) on my 2019 Levo Comp Carbon successfully and now running a 10-50T GX Eagle cassette (did have a Shimano 11-50 NX Eagle cassette).
Everything is working and didn’t need to touch the indexing which suggests the spacing between the 10-50 XD and 11-50 Shimano setup is identical.
However, I’m a little concerned that the orange bearing cartridge of the driver (see image) is ‘exposed’ albeit under the cassette and end cap. I would have expected some sort of rubber grommet to cover it? The end cap was supplied with the driver body, no parts were left over.
Everything is working and didn’t need to touch the indexing which suggests the spacing between the 10-50 XD and 11-50 Shimano setup is identical.
However, I’m a little concerned that the orange bearing cartridge of the driver (see image) is ‘exposed’ albeit under the cassette and end cap. I would have expected some sort of rubber grommet to cover it? The end cap was supplied with the driver body, no parts were left over.