Orbea seems to agree, they’re sending a switch and charging port/main cable harness. They’re not sure which one it is, but I’d confident that it’s one or the other.
Yeah I checked all the connections and so have the shop now. It’s nothing obvious. I don’t think it’s loosened a connection, but possibly damaged a cable. The cables for the switch are really tiny, wouldn’t take much to damage them for sure.
Hi 1st time I’d adjusted the seat post height. Yeah the only way you can charge the bike is via the charging port. I did have the battery out, there’s no LEDs or indicators on it at all. But prior to the ride, I did confirm it was fully charged with stunlocker. So the charging port worked the...
Hi @Murphius Motor has been confirmed good by shimano service centre. The charging port is sort of the main junction for all cables, hence why i suspect its the issue. Even if battery was bad, the extender should still work through charging port. Or the switch isnt sending the signal to the motor.
So after having the bike (Rise Hydro H15)for 2 or 3 weeks, and only doing 117km. It has died already.
Went to ride it on Sunday and it went off in the car park, no issues though went back on no bother. Climbed up to 1st descent and started the descent, got half way down and noticed they power...
I think it’s a lot more capable than just a trail bike, I was riding around Ballater today on all out enduro trails, Heartbreak ridge and mastermind, and the bike flys!
It was a 2019 E-Sommet I had before and the way I had it built mine weighed 25kg. I tend to buy heavy parts that will last over lightweight components.
Just done my 1st ride on it, I’ve upped trail too 50Nm and was able to keep up with “full power” Ebikes no bother. Also climbed some real steep...
Mine arrived on Friday 1st Orange H15 in Scotland.
Changed quite a bit….
Wheels - DT Swiss EX511 X Hope Pro 4
Rim inserts - Rimpact
Rotors - Emtb 220mm front and rear
Saddle - Ergon
Frame protection- invisiframe
Still got M8150 cranks and Hope direct mount chainring to fit.
Weight after...
I ordered an H15 as soon as they were released, was meant to be a mid January delivery…… I contacted Orbea direct on Thursday 24th Feb with my order number and was told my bike was built and due to be dispatched in the next few days, hoping to have the bike in the next week or so. Ordered...
Chain length is +5. I’ve just accepted that sramano only half works compared to a full XT setup. I still maintain that you can’t adjust B-tension to where it should be.
Thanks @Cisco great video from watching it, I’ve installed the same as that guy. Agreed the sramano setup isn’t 100% but it worked better than this on the bike I took it off.
@Part timer that is with the b-tension screw fully wound out. I’ve tried my spare mech hanger and it’s the same.
Haha thanks for the help @Gary. I used to work in bike shops before I got a real job, I’m perfectly aware of how to fit mechs.
The post was more about if anyone could advise whether a 2020 mech hanger would be better suited than the 2019 mech hanger.
@Gary from the pictures can you see anything obvious to back up your assumption that it’s fitted wrong?
I your right I could lengthen the chain, but the chain wrap would still be wrong.
So why do they sell a different hanger for the 2020 models which come with 12 speed, on the same...
Hi all, so I converted my 2019 Vitus E-Sommet from 10 Speed to shimano 12 speed, a while ago.
From the start I couldn’t set it up properly as the mech is too far round anti-clockwise even with the b-tension screw fully wound out. If you fit the mech without the b-screw stopper plate, then the...