Hi. I went from 11 X01 to 8 speed EX1 on a Kenevo. Cassette is expensive but you can replace smallest steel cogs independently to rest for about £20. Don’t miss the extra ratios on an e bike and should in theory put less stress on the chains with reduced chain angles. Despite EX1 being a robust...
Hi Tim
I installed a Lupine SL SF for Brose. Install was easy as per the video that you should find from Tori if you search for Lupine under the Specialized section. I think the light is limited to 1100 lumens on the Brose (6V) but can output 1300 lumen on 12V motor systems. Happy with the light...
I have a Sam Hill style mudhugger at the back and a carbon Mudguardz CG350 at the front. All zip tied on but so far quite secure and no damage. The rear guard lets some crud onto the pivot as it is cut down to keep tyre clearance, gap get bigger with suspension sag which is not ideal but better...
Hi. The stock ring is threaded so if you change you probably need to buy a set of nuts and bolts. I needed to grid about 1mm from each nut to make it tighten enough to hold the ring
Mine did that. All springs have coils are painted together at ends from new so bound to do this once they get some use. A bit annoying. Bugged me a bit too
Hi. Installed a Hope 36T 104 Retainer Ring on an ‘ 18 medium Kenevo today. No clearance at all without sag on suspension. So close that it’s probably down to manufacturing variation/ tolerances between brands of chainring and differences in bike bearings. I carefully filed about 0.5mm off each...