Search results

Price?

I made a video of problem with brake pads not fully engaging: Cyctrac EM5 brake problems After a lot of trial and error I finally found the solution. I installed 185mm rotor and now it's ok. I ordered a few EM5 bikes and all of them have the same problem. If you contact them they tell me that...

Tnx. I'll try.

Yes, I have 180mm rotor. This adapter I bought is 17+. But still the brake caliper is 1-2mm too high. Look at the attached photos.

Still not solved the issue. It's still 2mm to high. Maybe the only thing is to grind down the fork mount or brake adapter.

So the issue with derailleur is now fixed. It wasn't installed properly. I checked the manual and installed the right way. Regarding brakes I think this adapter will fix the issue: SM-MAF220P/PL

@irie tnx for your help. This is a Chinese fork. And a Chinese bike. There are a lot of information. Maby the best solution is to grind the adapter.

Yes,. both rotors are 180mm.

The adapter on rear is the same. There is nothing written on adapter. The Shimano adapter I tried is SM-MA-F180P/P2.

I adjusted another time, but it's seem the problem is in cassette, the biggest (50T) gear. The cassette has only 300km. Also, I added a new chain. When under pressure the chain wont sit properly. Maby a better cassette will fix this issue?

The rear brake is now ok. Front brake it's not ok. On first photo you see I removed washers. On second photo you can see upright original Shimano adapter, down is this adapter, that is installed. It's not the same dimensions. Still if I install original Shimano adapter there is still 2-3mm too...

@irie tnx, I will try. I hope this will solve the issue.

I observed (and adjusted correctly) but the problem is under load that on granny gear the chain don't sit nicely to this gear. Maby the cassette is of bad quality.

I'll try. Where can I find this kind of adapter, that are a few mm lower?

Here are the specs:

rotors are 180mm.

Derailleur is adjusted. It's SHIMANO DEORE/M6100-12S

No, I buy already assembled. This are photos of back, but I' can't remove anything.

@irie and how can I fix this? I can't lower the adapter.

This is how are installed: