Hello
I have an Bullit L and did extensive investigations on "insertion length", because I'm not satisfied.
I'm 1,84m tall with 87cm inseam length. I use a Vecnum Nivo 182.
The possible insertion in the frame is geometrywise 265mm.
Unfortunately there are two embosses for the fixation of the...
Hello folks
After separating the battery cover from the battery (which works perfect since day one without any hassle), I'd had the idea to move the battery's position a little bit more down in the frame, as I saw some unexplainable space below the battery.
After disassembling the battery and...
Hi guys
I don't want to steel the thunder from mdmtb, but mine is a much cheaper and more simple solution. In addition you can use the one cover with different batteries and without battery for zero cost, if you have some parts left in your bike part box...
Hello
I want to use my ticwatch Pro Wear os watch for heart rate monitoring. With the app "heart for bluetooth" it provides heart rate information beacon over bluetooth. Stride is recognising it and shows the name of the watch, but after switching the bike on I hear a message "heart rate monitor...
Hello Guys
Not much help from you, so I helped myself 😉.
Using a screw for fixing iscg chain guards, one curved washer from brake caliper fixation, a valve lock nut, a piece of aluminium and a flat nut plus some loctite and et voila, separated cover fixation.
Some rubber thread filler...
Hello
I did equipped my new Bullit last week with DI2 XTR
1. All three (small new) connectors on the motor are occupied. Like mentioned Sensor, Display, Switch!
2. The plug for the sensor is a special marked plug. It only fits at the motor, you cannot plug the sensor directly to the display.
3...
Hello Santa Cruz Emtb crowd
I was hesitant to get a bike with an integrated battery for the past years, because I thought they are impractical.
Last week I got my new Bullit and the internal battery is... Impractical, but the bike looks nicer.
Form factor is not nice for transporting it in the...
Hello Rob
I started with Zwift this winter.
I bought the cheapest trainer possible for Zwift (Elite Qubo Digital Smart B+), works great.
You can use it with all wheel sizes. There is also a MTB training tire and a thru axles adapter. So MTB on the trainer should work. You need a bike with...
In the "other" box you will find the battery. It should be an extra box, definitely.
And you should open it to check. Mine was perfectly build, but you never know.
@Rich_H
Right decision. The 2018 7.0 is a very good bike. Never had so much fun on a bike. And it's so playful, strangely.
Must haves:
- E7000 switch
- thumb lever (both already acknowledged from you)
- change resin to metal brake pads. Resin is unbelievable bad in wet conditions.
To personal...
Hello
I changed from 60mm to 40mm on my L 7.0. Its more direct steering and more capable in downhills. But I did it together with an update from 150 to 160. I did non recognize any disadvantages on steep climbs. Nevertheless to get pressure onto the front wheel you have to ride actively and...
Hello
Got my SW-E7000 Switch today.
Much better than the 6000. Bigger buttons, better to handle with gloves, over all smaller package, smaller width, so you can move the brake more to the outside of the handlebar.
The only downside is, the cable is exactly 300 and so it is too short to get...
Hello @Justchillin
I also had a peartune on mine as well.
Send it back again because at slow speed the motor had interrupts due to the reduces (halfed;-)) rpm count. Not usable.
Bye
Hello
I've updated at my 7.0 from 150 to 160 Debon Air. I challenged a steeeep climb around the corner right after the upgrade to compare directly and found no noticeable difference. If you leave the SAG at 30% it is only 7mm difference. Judging all the other variables on such steeeeep climbs...
Hello
Like others I'm thinking about to go down even to 160 on my Spectral:ON. The Miranda bend and fall off. Individual case?
Interestingly I had to retorque the crank arm clamping screws on my Shimano crank as they getting loose within some weeks. Maybe the clamping and spline are the...