Search results

I've not had the chance to ride it yet but Sticks Pass via Hellvelyn looks amazing! Having hiked it a few times. Helvellyn and Sticks Pass 940m climb, 13miles.

A note on tapping a blind hole like that. You usually need to use a bottoming tap after the initial standard (tappered) tap to get the thread cut to the full depth. Don't worry, a helicoil repair is stronger than an original thread cut in to the aluminium.

I ended up getting my frame soda blasted and left it raw/uncoated, now I never have to worry about paint chips and any tough marks or blemishes disappear with a scotch pad.

Hi Taxi, I have been running a Supernova M99 front light for over 12 months on my Gen 4 Bosch motor via the regular light output. It is annoying that it cuts the power to the motor at 10% battery... The light ports are not live unless the function is enabled via a bosch dealer, i have tested...

If your in the UK and the problem persists send it to Peter at Performance Line Bearings. I had Peter replace the internal torque sensor on my gen 4, you won't be disappointed with his service and prices. Cheers

So after much googling I know what I need, but there are no suppliers in the UK, loads in the US. BOSCH CABLE POWER SUPPLY 3RD PARTY COMPONENT, 1,400MM, 4 POL. NANO MQS-CONNECTOR The best option for me was from Holland Bike Shop and just take the hit on postage... Lets see how it works out.

Hi legends, I currently run front and rear lights from the standard light outputs of the Bosch gen 4 motor, supernova m99 headlight. It bugs me when it cuts off the motor assist at 10% battery just to keep the lights on due to regulations etc. Has anyone ran there lights directly from the 12v...

Hi Legends, I have just purchased a sweet 2021 KTM Macina Kapoho in the UK and flying to Aus with it tomorrow as a gift for my bro! I know I can't take the battery so I wanted to ask If anyone knows of a good place they can be purchased in Aus, I will be in Sydney for 1 week then delivering the...

Thanks for the quick reply. This is what it looks like to me, that the hanger sits a long way back. It at least seems better now, I will have to spend some more time on it this weekend to see if the chain skipping has gone. Cheers,

@Gary Hi mate, are you able to throw your opinion on my issue? Any help would be appreciated. Cheers,

Hi legends, I have replaced the 12 speed Sram cassette and Derailleur on my 2020 Mondraker Prime with a 10 speed shimano 11-36t deore cassette and an m640 Zee derailleur, lever and Sram 10 speed chain. I chose the Free Ride B-link, 11-36 range, but I get hardly any chain wrap in the 11t cog...