I'd like to elaborate on what JabJab said. You have to have the correct BA Box4 Version for your Gen 4 Drive Unit Firmware.
I have Drive Unit firmware version 1.1.2.0. and have been told I need a post April 2020 manufactured BA Box which apparently has detection evasion. Like JabJab, I too...
I agree with Chris@EDC , but judging by the opposition on here to his notion, this motor resistance must be confined to only a few bikes. If so, then for both he and his ride buddy to experience it together is surprising. I too found that when pedaling above 15 mph on the flat or downhill, I...
Still on shock setup, I have noticed my compression adjuster only moves 90deg and does not click at all. The Rebound is very stiff, also turns 90deg and clicks 4 times - if I push it in it turns without clicking. Is all this normal please?
Thanks Peaski, I have now read the article so should be sorted. Why RockShox put graduations on the Rear Shock but not on the front is anybodies guess, must have saved a penny :)
Great idea guys, its Stereo 2021 with 140 forks so 20% of travel will be 28mm, for 30% it will be 42mm. I'll see if the rough air pressure setting is correct now. Many thanks both.
Hi Northerncube, I have used the Zip tie method on other bikes where they give you measurements to work to, but I don't know where 20% or 30% is on my forks! The RockShox video says "if you don't have markings, go to 'Service'" but in fact there's nothing there to assist.