Search results

I’ve now updated my signature 😉. My FC2 controller came with MMG522C4814F802040.1

Only the FC2 controller is needed, but you need to calibrate the motor. So you need the BESST tool or Dado’s dongle.

So I’ve got the controller back and it’s working. Just a pity it ended up costing me an extra $50 🙁.

According to Chili, it’s under testing. It’s expected to be ready March/April.

I’m afraid Chili has been less than helpful. Bafang has tested it, and surprise surprise it worked ok for them!!! I paid $20 to send it and she wants another $38 to send it back 🤬. Unfortunately there is a lack of honesty, obviously Bafang have fixed it, but I’m left out of pocket. I wish you...

I bought two FC2 controllers from Chili, one of them has the same issue as yours. I’ve had to send it back. I’ll let you know how I get on!

Do you have a smart BMS? I switch my battery on/off with an app on my phone.

This is the M500 which is basically the same.

Hi guys, a couple of questions about M510 v2. Can you calibrate the torque sensor with the BESST tool? Does the Bafang Go + app. connect to the DPC245 display? Thanks.

Straps are behind the original cable brackets. I’ve added a bracket at the bottom to stop the battery sliding down. Then I’ve used thick stick on felt pads for protection.

They are custom made batteries that don’t have a switch connection, so I filled the holes before painting. On my old E-10, I disabled the switch in the battery.

Great for fixing this problem. Do you have a part number for the new torque sensor. I guess that Bafang shipped a whole batch of motors with faulty torque sensors?

Yes, it needs to be the cs version.

Yes, it’s far from perfect but mostly ok. It cuts off very quickly at 25kph.

I think most people are using CRX10NC4814i101003.1cs, but there is still a problem. You must wait about 30 seconds after switching on before applying pressure to the pedals.

The DPC241 was only included in the kit directly from Dengfu. I believe Victory only offer the others to keep their price low?

I have the DPC230, which is easier to read than the previous DPC241. If I could choose, I’d get the DPC231 which has Bluetooth just in case Bafang update their Bafang Go app. to enable setting motor parameters. Hopefully that makes sense.

I downloaded both. The Mac version won’t install, says file is corrupt. The PC version installs ok and seems to have username and password already set, but it’s in Chinese and haven’t managed to get it into English!

It just needs to work with the firmware that Chili has already supplied. It’s the “i” version.

I’m in the Aveyron, 12270 if that’s any good.