Search results

Hi, this is my screenshots I'v test to select EP8 RS on St Unlocker instead of EP8, in e-tube max torque goes to 60nm

Hello, it seems the motor has a bug sometime. Mine display 85nm in etube app, but he is a 60nm. The vendor haven't change it. He ask at orbea and shimano, and the answer was something like : the bike has the orbea rs firmware, he can't give 85nm, but when programing the motor there is...

Mine is assegai front exo max terra (or max grip i don't remember) , rear is dissector exo+ max terra. Very good combo great grip in all terrain and corner. Ride in mud, garden rocks root sand and hard pack. Great rolling speed, a bit pedaling résistance but not too much.

Hi, it doesn't fit on a m10 size M

Yes, I've buy one pair. They are great. I feel better on the bike and I've much much less pedal strike. With the rockguard, and more token in suspension it's perfect.

No issue on mine. Just a faulty speed sensor after buying (i think he wasn't plugged right). No issues with crancks but changing it for miranda 155mm, original where too long. A very very great bike. 1400km on it since September, 25% off. 40% eco and split for the other 2 mode. I've made some...

I don't know for the motor, just my feeling is this one : I'm not good at low rpm. I'm better at high rpm. I can sustain hours at high rpm but only a few few seconds,minutes in best case at low rpm. Low rpm put my in too high heart bpm. I can put bike in trail mode but it suck too much battery...

It's mostly hard rock or packed track with root. Some with loose rocks hand sized

I want to use mostly eco and motor off. I've 90km and 2400m d+ to do in one ride with only the frame battery, not the extender. I can't put the bike in trail or boost. And with eco I've more strength to apply in the climb in lower gear than my analog bike wich is in 26" 28-48t

I've very high gardien climb near my house and where I go in holidays. On the 51 rear cog I climb at a 60-70 cadence. I prefer near 90. And I've to put a lots of efforts in for climb.

Hello, I've an orbea rise witch has au 32t chainring. I want less tooth. Is anyone know wich brand made a 28 or 30t chainring for the ep8 please?

Hi, I'm 88kg, I ride in all terrain, all condition, muddy winter, lots of rocks and roots and dust summer on sames paths. I use assegai front, dissector rear both exo + at 26 psi front, 30 psi rear without insert. Now I've rimpact in it, I run 24bpsi front 26psi back, it has a lots of grip...

I've this noise, but it came from the front wheel hub, after some wash and mud ride water has find a way in, I think the heat, and pressure change make air flow in tiny holes and whistle. It always appen at 18+kmh and always after a dh (400m d-). I've it without pedaling. Cleaning the hub, good...

Hi mate, I've the same issue on my rise with the fox 36. Put some stanchion fluoro oil before every ride made it smoother. It seems you need to flip bike upside down for 30min sometime for bring the lower leg oil to the sponge under the seal

It's a good advice, i've never ride with a computeur before. I've a bosh gen 4 which display 5 bars of battery and Remaining distance on his screen, i'm used to do with that instead of battery percentage. I must try this

% of battery takes time to appear. Sometime you need to pedal and use some battery for refreshing it and it will appear

Garmin doesn't make our life easy XD

I'm agree with you, garmin miss something here, and same for the power apply on pedal, there is a sensor in the moteur but Shimano don't cast the data :cautious:

I've test it work on orbea rise with ep8 rs but I can't have what I want in my display. It's the same problem with other data screens. I want to display % bat, mode, hearth rate cadence and travel range on the same screen. If I use a data screen I can't connect the bike to my garmin 830, and...

I can't wait to use it, I hate the orbea rs toolbox XD