Search results

I've snapped the pivot bolt as well. How did you manage to get the old one out? The bolt now just spins. Also, the threaded end is still screwed into place. Is there a special tool?

I did some of my own testing by throwing the helmet at piles of cushions and I did manage to trigger it immediately after impact but I had to throw it hard. I'll try some simulated crashes followed by lying still.

I've found Specialized Angi to be useless. I've had numerous crashes, including over the bars and not once has it triggered the alarm to register a crash. I thought it was faulty, so took it back to be replaced, but the second one was the same. Also had problems with it disconnecting from the...

I had to return my set as the pawls in freehub all snapped off and ratchet ring broke as well. Comes with an alloy freehub body as well which the cassette eats. Customer service was excellent and gave me a full refund. I wouldn’t recommend for an emtb though. I’m looking at the new hope fortus...

I had my bearings replaced by my LBS. Getting them out was quite a job. They are supposed to tap out but mine were stuck fast. They had to heat the hub then really hammer them out. You don't need to/can't remove the ratchet ring.

I'm having the same issue on my Kenevo. Same GX derailleur. I'm wondering if it's due to the chain which is, according to my LBS, a bit stretched but not needing replaced quite yet.

Doesn't sound like we'll be getting sub 1Kg 1KWh batteries any time soon. But prices should be coming down.

Had my first ride on some new wheels today. Hunt Enduro Wide 27.5s HUNT Enduro Wide MTB Wheelset The Roval traverses which came with the bike were fairly buckled after 400km despite being trued twice. I decided to replace them after a big ding to the rear wheel meant it would no longer seal...

740W from 1.3 motor firmware 10.22.3

740W on 2019 Kenevo, 1.3 motor, firmware x.22

Thanks Paolo I'll try it tomorrow

Also I've read on this thread that updating the firmware to .23 should give me a higher max power output. Do people find that this corresponds to a reduced range?

What difference does Blevo madness setting make compared to Default Specialized? (I'm on firmware 22) I see in the instruction that in madness CM = 0 whereas in Default CM = 100 the other settings are the same. Can someone explain CM to me as in the instruction manual it's not very clear. Thanks

Hi Paulo I've just downloaded Blevo. On mission control it says battery health 100% whereas on Blevo it says 95% Which is more likely to be correct?

A brand new Merida e-one sixty 900 for less than £3K on eBay. Sold by a company in Israel here

@SteveVentoux I'm about your weight and ride a Kenevo. Berkshire Cycles can get stiffer springs custom made. They got me a 725Lb one

I'd go for the Fantic because of the bigger battery. Could you get a Fantic 140 or 160 if you feel the 180 is too much for the type of riding you do?

If you can get a new Fantic 180 for $3881 I'd get that as the normal price is €6000

I'm sure you could find a Kenevo owner on here with the original bars and stem that would swap you for the Renthal/RaceFace. I would, but I live in France and posting would be a bit of a nuisance and would require a lot of trust on both sides

Thank you