Search results

Presently, my answer is simple: I WOULDN'T!

Yes, fully support if you have all the time in the world. Waiting on some kind of reply, after sending full description of what happen, pictures, print screen of all Bosch Components from Flow App and even videos documenting it. Wait...wait... wait.... You'll be covered bla, bla,bla... But...

Since yesterday, when the problem started, nothing has been said. For the moment, and since I prefer not to damage anything else, I'll wait for Canyon's response (seated or lay down....) When the Ebike arrived, had loosen headset, because the star nut was moving upwards... simple fix, after...

In the meantime: Bike is stopped Warranty is ticking They already have my money Yes I'll try the zip tie, but wouldn't like run into problems........

If I knew about it... I would save my Euros, or would go Levo! I like the bike, but not being able to ride and wait for repair is just unacceptable... Meanwhile Warraty period is not stoped or extended, with the bike inop! This really annoys me! F.....

Shaunovan, Does it work? There are zipties attatched to the engine, correct? Care to take more pictures? Thanks!

One more latch going wrong... Info: Total Odometer- 958km Usual ride: Average Distance - 35km Average climb (cumulative) - 1600m Terrain: some gnar, some jumps and drops (nothing massive like 2m to flat or anything similar). No mud, all dry rides. Charging system: never took off the battery...

Today I've noticed something peculiar related to motor noise. The motor would rattle between the 8th smaller cog (18t) and the smaller one (10t). If I used the 7th (21t) or bigger cog, engine would be (almost) rattle free/ quiet. Has anyone noticed this? The conclusion I've reach is that some...

Customer Care is top notch at Specialized, and great to know that still is! Congrats 😉 Start to be disappointed with Canyon (1st bike from them....), and sincerely I'm starting regreting not buying the Levo!

Rear triangles should all be the same. There aren't any Chain Stays longer or shortet, according to Canyon's site (it's allways 445mm)

Yes, disks could be thicker... Side note / opinion: In coming years we'll have thick rotors (probably between 2.5 and 3mm. Motos have >4mm!). This will help on long descents, and also probably we'll be riding 240/250 front and 220/230 rear. Hope this "upgrade" comes without speed limit and the...

I respect, but me being 87kg naked, and descending stuff as steap as you stated, if I was you, I'd revise and overhaul the brakes. You might have a piston that is not fully rectracting, leading to pad/disk drag (somethimg I personally complain, but without any problems like you described)...

To balance such negative report, and because Internet attracts more negative comments than neutral/positive, I leave my comments from last 800km with this brakes on similar ebike: The longest descent I've tried is around 1000m descent over 9,5km, and never had any problems with the brakes...

From what I could retrieve, it doesn't specify if it's high or low rpm. Due to different situations: Upshift - normally it'll be performed on high rpm/low torque conditions Downshift - normally is performed on high torque (loads), and while climbing. I supose the system is designed to shift...

Power is basically load (torque) times rotation (rpm). You can have High Power both ways: 1) high load (torque) low rpm 2) low load (torque) high rpm What I assume from SRAM position, is that it shifts better under power (or load in this case), than stop charging the pedals and wait it to...

I would go X0 if I was not "gnarly" like on the fanatik utube video. I smashed my Shimano cage last week, and althought I could straighten it to work o.k.... just for a couple of rides, I just bought a new RD, and will keep my straighten RD in the bag, for those long weekend rides (just in...

Any pictures on this, are more than welcome. Thanks

From what I investigated, Bosch system doesn't work with 3rd party GPS, so... 1)has anyone assembled/ride with a Kiox 300/ How hard was to assemble The Kiox300? Ifigure we need to connect to the motor&controler at the top tube... 2) or other compatible device (which one)? Besides bosch devices...

Your rear tire still looking nice! Mine is completly done, but still gripping! I've just order a Eddy Current 2.6 to check how it handles. Was about to go full fat, but this small step to check how handling changes from the original 2.4

Could you please share frame size and bottle size? Thanks a lot!