Lmao. Sorry left out a m there 3mm thick.
Have you found the clear mask in thickness more then 1mm thick??
The moto guard 3m i find comes in 3 sheets to pack and there 12x26 inches per sheet
3m makes a great clear vinyl called moto guard.
You can buy it in large sheets.
I use it on bottom bracket and down tube. Works great and u can get it up to 3m thick.
It comes off pretty easy with a heat gun
I have seen most the motor manufacturer deny the larger companies the right to sell motors.
I would speculate because there buying power.
I also have seen that both Bose and shimano have denied sales of drive units to those who don’t have approved battery packs.
You can buy the steps drive...
99% of the time i will never state who I’m testing for or with.
Unless they ask for public announcement.
But i will tell you that a bike company has looked at our data regarding there enduro and there taking bikes already shipped to dealers and replacing there wheel sets with wider front and...
Gary, slick condition narrow rim works well, not enough tire bite to roll the tire over the side of the wheel.
The narrow rim smaller tire is fast in some places but it is not forgiving.
And yes at 54 i have done 6 Eduro races on ebike and have won all 6 races so far.
Graftin Mesa should...
I suggest you may do the same, as very few enduro riders run anything more then a double down case tire.
Wire bead DH case tires you can get away with a narrower rim, and in most cases work better as heavy tire reeds narrower rim to flex,
But with a evo case folding weight tire not so much.
I...
Fantic Integra 180
65 deg head angle
73 deg seat post
42mm offset forks 2019, 51mm 2018
165mm cranks
630 wh battery, 1 Allen bolt removal
180mm travel front rear
1x8 eagle cassette
51.8lbs
Integra link rear suspension
Good all around bike that can tackle serous enduro riding and terrain parks...
I have the 27.5 x2.8 rear and the 29x 2.6 rear up front.
Not sold on the front yet. Have the 29x2.4 and 2.6. It’s a little scary when wet. But worked pretty good on hard pack and chunk.
But can’t give it a proper shake down till it dries up a bit.
We been getting hammered with rain.
Plus...
Gary, so i tried something yesterday, couldn’t give it a proper shake down as it was really muddy in a lot of places but shows some promise.
I put a 2.6 DHF wt on the rear on a 40 internal wheel. And a 2.5 dhf on front with a 35 internal.
That’s a 29 front and 27.5 rear.
So far I’m impressed...
Next time just throw tire in a hot bath tub with soapy hot water It removes the mold release wax and tire grips better and it makes it easy to mount. Mounting one with the cushcore is a bit of a challenge
Last couple races i was at, 80% or more where running dhf up front.
Not one person finished on podium of any class with it.
Mary And DHR2 UP FRONT WON EVERY CLASS
I find that drift zone to be death on downhill off camber turns. It may or may not hold, and anybody guess it or when it says goodbye.
I run it sometimes because it’s fast. But if there is hard pack with loose on top or any off camber turns that girl is left in the rack!!!
Gary, i think the reason you find the DHF Predictable is you run a 2.25-2.4 wide.
Jump to the 2.5 or worse the 2.6 and that predictability jumps right out window.
I blame it on the gap between mid knobs and outside knobs. That space gets considerably wider in the larger width tires. Also the...
Gary, my ebikes are considerably harder on rear tires then my acoustic bike.
I think because i can climb hills i can’t come close to climbing without high assist. The leading edge and center knobs just get hammered, but trailing edges stay sharp so tire still brakes well and corners well.
Rob, Magic Mary, adix compound.
I get 900-1400 out of it up front.
But in the rear it doesn’t hold up.
I completely wore one out on the rear at mammoth in 1 day practicing for Kamikaze. I almost never skid.
This DHR2 soft comp has over 1k miles. I took it off after i let friend demo the bike...