Search results

My Rise comes in heavier than I thought (19kg) with pedals I swapped all components off my M20 to parts I had & liked now have 2 shocks a TTX coil & Manitou Mara pro. Bike rides fantastically well & parts are often heavier than manufacturers claim. Weighed a DT Swiss XM481 was 570g on kitchen...

I have a pair of ION knee pads & Oneal knee pads as I was a rep for both so got less than trade at time

I think any of those 3 would be good. I have the TTX coil but on my Rise & think it’s a great shock, I also have a Fenix from Fast Suspension on my Mega which suits that frame really well

One picture of the Levo, the bike comes with a DPS & Fox34 then setup guide is for a 36! Which is it on the bike?

Best non ebike I have owned & best ebike

Since 2013 Fox have always said their new forks & shocks are best EVER each year 😂 that’s why I don’t run Fox suspension loads of better choice out there

Loads of MT7s in stock at Magura it’s the 220mm MDR-P rotors that are on back order

I am running MT5s Ltd edition on my Rise with MDR-P & MDR-C rotor on rear, it’s a one piece, the rotor has a hole where you can fit a Magura magnet for rear wheel works perfectly

Transits are rapidly catching VW in crazy pricing. Take the MSRT as an example converted to a camper it’s about 70k….

Bought second hand air shock for Rise manitou Mara Pro & new rear DT Swiss rim the AR30 had bad wobble 😂

Have to carbon framed bikes. Never broken a frame but have snapped couple of carbon windsurf boards

CRC were bought out by Wiggle & are massive, plus Hotlines in U.K. distributors for Nukeproof, WTB etc, CRC have race team & Ex DH now Enduro rider Sam Hill rides for them

The 600s basically Shimano Deore 8150s XT & 900s XTR

E13 did no research for the EP8 motor just bunged on a rubber spacer, & surprise surprise they don’t work!! I run Shimano cranks on my Rise they are after all built for the motor

Is your motor an E8000 or EP8 as E13 cranks are different

Yes 1X chainring bolts which are shorter. I have a spare brand new chainring if you need 34t Burgtec steel one. I bought it then found my spider already attached to a 32t new chainring 😂

https://www.ebay.co.uk/itm/294945451659?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xD2J2zkiSp6&sssrc=2349624&ssuid=b-vLSA1pTdO&var=&widget_ver=artemis&media=COPY

53mm chainline with the spider I fitted a 32T 104 bcd chainring to the spider but had to remove chain device as the chainring caught on the bolts

Magura sell a magnet that fits into the hole on MDR-P & MDR-C rotors

The BB height is low for an ebike but not for normal bike. My Ripley V4 had 336mm bb would get pedal strikes but was about timing, issue with e-bikes is we pedal everywhere! I do however run my M20 at 160mm travel so generally no issues