Search results

  1. F

    Dengfu E10 - The CHEEB V1.0 - Discussion

    Just found this amazing item on AliExpress. Check it out! HRK237.98 41%OFF | PROWHEEL 152MM/160MM/165MM/170MM Bicycle Crank Arm E-Bike BAFANG M600 M510 M500 M420 Electric Bike Motor Mid Mounted Motor https://a.aliexpress.com/_mLNRrng
  2. F

    Bafang m510

    when I pedal constantly I managed to reach 42 km/h and the engine still works. 😂😂
  3. F

    Bafang m510

    FC 2.0 36v is limited to 32km/h. but, when I pedal and pass 32 the motor still gives support. when I stop pedaling and the speed is higher than 32 and start pedaling again, the motor does not support until the speed drops below 32.
  4. F

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    honestly, not much of a weight score! on e10 xl size, if I fold the 720wh battery, put lighter components, lighter tires, lighter fork, wheels...... I believe the weight could be under 22kg. and much more power. and in m size even lighter.
  5. F

    Can you build your own battery for the E10 ?

    now I see that you intend to connect one to charging. it depends on how the battery is assembled, whether it has a contact for charging and discharging together or separately. most batteries have separate ports for charging and discharging.
  6. F

    Can you build your own battery for the E10 ?

    not really. batteries do not discharge equally.
  7. F

    Can you build your own battery for the E10 ?

    new battery arrived.😁
  8. F

    Can you build your own battery for the E10 ?

    I had a bafang m500-m510 on my previous dengfu e10. diy battery and smart bms. nothing special, as you said, just problems with the application. I turn off the battery via bluetooth and the app and after 2 days I can barely connect to bms. so now I had a battery made with an ordinary bms...
  9. F

    Can you build your own battery for the E10 ?

    turning off the switch does not result in deep sleep of the battery. only the circuit is not closed, so that it can release current towards the contacts from the motor. I don't know the exact procedure, but it's a little more difficult to set the battery to sleep mode. according to everyone, if...
  10. F

    Can you build your own battery for the E10 ?

    and why the switch at all? what is the benefit?
  11. F

    Bafang m510

    does anyone have a disc rotor mount speed sensor for sale?
  12. F

    Can you build your own battery for the E10 ?

    I ordered 10s5p LG 5800mah 21700 cells. 29ah battery. 🤔🤔😁
  13. F

    Bafang m510

    Hello. one question. is it still possible to load 48v firmware into a 36v motor? I intend to change the battery. well known bafang battery percentage.
  14. F

    Bafang m510

    the speed sensor should be positioned. drill holes and fasten the nut. there is also a picture of the nut
  15. F

    Bafang m510

  16. F

    Bafang m510

    Hello everyone. here is my review of the m510 after a few rides. I had a little problem with the speed sensor, actually the magnet. since I use a sensor and a magnet on the brake rotor, the magnet was too close to the sensor. so it occasionally showed strange speeds of 40, 60 km/h, and I was...
  17. F

    Dengfu E10 - The CHEEB V1.0 - Discussion

    there is still room for engine improvement. let's hope that with a future upgrade the engine will be improved. I adjusted the settings a bit, it can be adjusted nicely.
  18. F

    Dengfu E10 - The CHEEB V1.0 - Discussion

    Hi everyone. new bike assembled. color dodge challenger plum crazy purple pearl metallic. the components are more or less visible. weight 23.5-24 kg. XL frame, M510 fc2, 36V. 🔋 800wh 36v, 22700 panasonic cells. today the first ride, 24km 1100 met altitude, passes 1-4, mostly 2 and 3 30% spent...
  19. F

    Bafang m510

    has anyone been able to adjust the engine parameters via the go+ app. I won't even connect the dpc245 and the application. some help, suggestion?
  20. F

    Bafang m510

    is this fw suitable for my engine?
Top