Search results

your rack may be blocking the ability of the speed sensor in the motor housing to pick up the magnetic field from the rim magnet ( the rim magnet is the rectangular block attached to the tyre valve in your photo). I suggest you remove the rack and see if that fixes your problem.

I agree that if there is considerable drag then the sprag bearing is not releasing. There is one other possibility and that is that OFF does not in fact switch the motor off. Removing/disconnecting the battery would discount that as a possibility.

SOLD

offers?

Linkglide uses HG driver

So the Bluetooth connection is between the axs mech and its changer....and the mech must be active for the axs app to read battery drain . For Mastermind to have the ability to read that info surely its has to be paired to the Axs mech? The only other way I can see it working is if the Axs app...

I know you say the conditions under which it happens but a noise at one point of crank rotation is weird! Are you sure the right side crank or chainwheel is not hitting the chain guide??

Probably a mistake. If the tyre has no coloured ring around it, it is a verstar compound not Addix. That does not mean it is not a good deal though if that is the case. The Addix compound is supposed to offer more grip due to a different rubber formula..........I would bet that is mostly...

bump

How much motor assist is provided at different cadences is largely defined by each motor manufacturers firmware. The Brose motor as used by Specialized ( and with firmware designed by Specialized) provides more support at lower cadences than a Bosch Gen4 for example. Typically in Trail mode with...

My printer only does paper!!

Bump

Just got this from a small supplier in Germany on ebay. If you have Kiox 300 kit fitted but remove the actual display unit, the interface contacts are left exposed. This little cover keep them protected from water and dust.

Maybe something for @Rob Rides EMTB to look at ? After uploading photos there are still prompts to " upload all".....!

just use ordinary tweezers with some insulating tape wrapped on the tips.

...!!! sorry about the doubling up of photos....dont know how to correct that now!!

Reluctantly decided to sell my Whyte E180 RS. The bike was purchased originally from Leisure Lakes in August 2020 but the owner suffered a medical problem and I bought it from him in September 2020 with 50 miles on the clock. The bike has been completely faultless ever since covering c 970...

All of this may be old hat to many of you but maybe helpful to some! Flow App: I just bought a second Bosch Smart System bike, meaning I have 2. I tried pairing Flow to the new bike without success but it meanwhile connects straightaway with the other bike. I found I had to delete the app from...

nb...it takes 24 hours for locktite to set and needs to be undisturbed meanwhile

No reason for water ingress to the top of the battery except for water tracking down one the cables......and the most likely entry area is a top tube grommet...especially two cables in one grommet. Use grease to seal it and don't point a hose at either grommet. My 2023 RSX has no "umbrella" and...