So if I change circumference in PCE interface, can I then manage the other settings for presets via the iOS app as long as the circumference is the same?
Drop circumference to 2200 via PCE.
Control power, torque, and assist levels via iOS app using presets.
I got the PCE02 and paid for premium license. I have a couple questions tho:
Orbea Rise
-What are the default power (W) settings? I read somewhere 500W across the board.
-What is the easiest way to manage profiles without downgrading firmware? If I change max torque and circumference through...
I ride a L. Measuring BB with a measuring tape I get roughly 353mm BB.
160/160 Mezzer and Mara
2.5 Assegai F, 2.4 Dissector R
The Mara Pro won’t fit an offset bushing on the head in most frames due to the design.
I love how the bike rides like this. It does NOT ride like a 160 bike if that’s...
Custom Large M-TEAM (160/160) 42.9 lbs with pedals.
- Manitou Mezzer Pro fork
- Manitou Mara Pro shock with (1) offset bushing
- Canfield Crampon Ultimate pedals
- Assegai exo+ up front
- Dissector exo out back (stock front tire)
- Tubeless
- Rimpact pro front and rear
- 203mm Galfer rotor up...
Sorry if this has been answered already…
Does derestricting an Orbea rise eliminate the “custom” tune that Orbea put on the motor? I love the adjusted settings I got 95% of the time, but there is a trail or two that I’d want full torque and a higher cutoff speed.
FYI there isn't enough clearance to fit an offset bushing on the head of a Manitou Mara Pro shock (maybe 1mm clear static).
Tried to fit a 216x63 with two offset bushings. I was trying to run 160/160 29er keeping the HA and STA in check with stock, static BB would raise a bit, but once sagged...