Ah. Glad you showed that pic.
Could have done some damage there.
I have blind pullers - just trying to think how to hold the link arm to support it without interfering with the bearing. There’s not much land to support on.
Thanks for help.
Thanks.
Ive watched all those. Ive already changed axel bearings. It’s straight forward.
I’m talking about the link arms that connect swing arm to axels. X4. Each has a double bearing pressed in. Simple to install - there are videos for that. But nothing for how to remove. Seems it would be...
Hi all.
Gutted about Pole.
The bike is awesome.
Could do with some advise if possible.
Just doing a frame bearing change.
Done the axles and all good.
Does anyone know how to remove the two bearings pressed into the swing arm linkage. can’t access anything on pole website. Is there a...
Finally have the new toy.
Maiden voyage this weekend.
Quick question
Regarding the battery keyhole.
Is there meant to be a cover for it or does it remain open?
Cheers for response.
where you based?
I currently have a large bullet reach is 475mm
i do feel sometimes a bit stretched when descending. I used to ride a medium megatower and that was 447mm in low setting and when the bars were rolled forward it was fine..
I was thinking that with the...
Just had a brief pedal on a k2.
felt ok size wise. Similar to the SA bullit size large but could feel the extra wheel base. used to ride a medium megatower before the bullit at 447 reach and was fine. Think you can get used to most geo,s really.
thinking could probably go K1 Though.
choices...
Hi all
struggling to choose between k1 and k2.
5 foot 8.
29 inch inseam.
also. According to seat post calculator. Says I can only fit a 125. This seems very short.
anyone running a longer post over and above what the calc suggested.?