Those wiring harnesses seem a little fragile so I thought it would be good to have an extra. I have searched everywhere to buy one and they are not easy to come by. I even got an email from the Darfon battery company saying they could not sell parts direct to consumer.
FYI Another eminent auction is listed. Looks like mostly leftovers and it is buried in the "February Combined Asset" auction.
I am interested in getting another wiring harness so should anyone be bidding on Lot of Assorted Electric Battery Components | Online Auctions | Proxibid I would...
Took the Drive out for its first ride this afternoon. Generally works great but need to tune the motor I think? Also need to clean up the cabling. Some parts of the build were pretty frustrating. Specifically cable routing and the preponderance of tiny screw/bolts especially for the motor...
All parts finally in house. As I start connecting everything I noted that the battery harness (2I) has 4 wires with connectors. 2 of these wires attach clearly to the charging port (2H) and the black circular connector goes to the motor. What is the fourth wire for? Is it unused by design...
Just waiting on my motor to finish build. I got the power switch that appears to match the stock one (Shimano EW-SW300). It uses the sd50 wire instead of sd300 so i assume i need a converter but what does it ultimately plug into? motor, battery, or display?
Bag 2E is (I think) part of speed sensor. It's a magnet on a small mount bracket.
I think I have the battery / charge port install sorted. You need to acquire some extra screws that were not included in my parts kit. Here's what I used:
1) M4-0.7 mm x 18 mm (4) - shorter than 18mm will work...
Not certain yet but I think this is pretty easy.
Part I mounts directly to battery on the end with the led indicators then bolts (J) and spacer (D) are used to attach in downtube on bottom bracket end.
Upper mount requires removing battery handle and then attaching mount part (A) from first...
Yes. I went back in to their office and mentioned that my description specifically stated it came with LT link and they got one for me from the warehouse.
My Drive did come with an axle and derailleur hanger attached. I went back to eminent and got my LT link. Just ordered some new shock mount hardware and I think I have the frame sorted. Now working on the battery install. The side nearest the motor seems simple enough not sure on the upper...
No linkage at all which would immediately put me in the "machining" category. I have inquired since the auction description did say it came with a linkage. Here are the detailed parts I got labelled for reference.
I am also a member of the Eminent Drive LT auction club. Lots of parts to sort through. First thing I noticed is that I did not receive an LT shock linkage in my bag of pieces. Is this true of all the frames?
I was lured into the eMTB world through the Eminent Cycles auction. Got a new frame (Drive LT) with a BUNCH of bits and hope I can build it into my first eMTB.