Mikerb's latest activity
-
Mikerb replied to the thread Bosch Smart System Experts (Help Please).you changed the bike's controller so in order to connect Flow to your bike you need to start from scratch with the pairing process. To...
-
Mikerb replied to the thread Levo Gen 3 Turbo levo Gen 3 2024 rear suspension.air pressure is too low then
-
Mikerb replied to the thread Split link conundrum.because it depends if you fit the quick link on the lower or upper run of the chain. When fitted on the lower run the arrow points...
-
Mikerb replied to the thread 2023 Orbea Wild.virtually any brake set up will lock up a rear wheel on a loose descent and traction is mostly down to how much weight is on the back...
-
Mikerb replied to the thread 2023 Orbea Wild.Back brake on steep descents is always going to be that way because rider and bike weight is pushed forward on the bike....and applying...
-
Mikerb replied to the thread Servicing some wheels but have no clue ..Same!! I have never seen a hub with a continuous sleeve sitting between 2 end caps. I can only assume the sleeve rotates on a bearing...
-
Mikerb replied to the thread Tow bar mounted bike racks.One other thing to check with tow bar mounted bike racks is maximum permiitted load.....not just for the rack but also nose weight on...
-
1st to the 4th May according to Google!
-
Mikerb replied to the thread Bosch Flow app. and 2 bikes?.What date is that bike show?
-
Worth translating: Bosch is releasing a new app update for the Riva Bike Show that allows multiple bikes to be parked in the...
-
Mikerb replied to the thread Servicing some wheels but have no clue ..Ok so if what I referred to as a spacer is indeed a continuous sleeve going from end cap to end cap, consider how the sleeve plus end...
-
Mikerb replied to the thread New to EMTB in Devon, where to ride?.he will need a passport :p
-
Mikerb replied to the thread Servicing some wheels but have no clue ..I believe @VWsurfbum is right....and you may be misunderstand the construction of a hub.....any hub. There is no axle in a hub!! Inside...
-
Mikerb replied to the thread Servicing some wheels but have no clue ..As above some photos may help to let folk on here give some ideas. I don't understand how the caps you refer to form part of the hub if...
-
Mikerb replied to the thread Servicing some wheels but have no clue ..If they will not pull off they may be threaded ( despite having no hex etc) . Try using some mole grips with a piece of rubber or...
