I wanted to install this remote control on the frame. But I think it will weaken the frame a lot. And I don't like that I have to take 3 wires out of the frame. Throttle control, shift button and a light for the headlight. That's why I chose this wire. See the link and photo.
Hi! There is no partition. There are two stops that prevent the homemade battery from reaching the motor. They also removed the partition at the top of the frame. There's plenty of room for the battery in the frame now.
Hi! Just don't share the password. With this password, I can only change the levels. You need to set a speed of 25 km, then you can record new engine parameters. I change the wheel size and speed limit using this wire.
I tested the firmware at home. He pressed the throttle button. I have a 48V battery. I will first test the 43V firmware to understand the difference from the 48V firmware. I couldn't install the 52V 1000W firmware on my 2.0 motor.
I downloaded all three firmware at home. The firmware has 48V, the throttle limit is set to 45km per hour. Has anyone managed to travel for a long time on 48V firmware?
The quality of the E82 frame is the same as that of the E10. It has become significantly lighter. Now the lidless frame weighs 3200g. The lid is 270g. If you jump from a height of 9m, the frame will break. It has thin walls. The painting quality is good, I like the e82 frame. I really liked that...
In order to blame the frame manufacturer for the warranty failure, it is necessary to understand this situation well. Does the warranty apply to jumps from 9 meters high? If the driver's weight was 60kg, then we should think about the poor quality of the frame. If the driver's weight was 120kg...