I've been wanting to get the Sram powercord for my AXS derailleur for a while but the over 160 euros required have always held me back.
Yet another battery change on the fly on the trail, however, made me change my mind and so, still convinced that I didn't want to spend over 150 euros for a...
It works
Just need to put a 2.5mm spacer between casette and freehub body.
My actual set-up is (see post #73):
XX1 Axs shifter pod
XX Axs T-type 00.7518.161.000 Mech
XX1 xg1295 10-50T cassette
XX1 Eagle 12s chain
and it's working with no problems since December last year.
Hi everyone,
this is the fourth time the lockring has been coming loose.
In order I tried:
Used lockring new o-ring with grease 30Nm
Used lockring new o-ring with Loctite 30Nm
New lockring new o-ring with grease 30Nm
Steel lockring (selfmade on leathe) new o-ring with grease 30Nm
I have a...
Ciao,
Sto avendo il tuo stesso problema con l'allentamento della ghiera del motore Bosch gen4. In estrema ratio ho forato e filettato la ghiera per mettere un grano M4 che poi va ad inserirsi su di un corrispondente foro dello spider ma la soluzione non mi piace. Tu come hai risolto?
Grazie
Ivan
For everyone wondering if the T-type works with the old eagle the answer is yes. I wanted to mount the XX derailleur but I had just changed the cassette and chain and I didn't want to replace them and so I only replaced the gear mech. I have followed the same procedure for the standard setup but...
I know it might sound weird, but since I've always had a good 60% of remaining battery after each ride, I was wondering if it was possible to tweak the battery to have less capacity and hopefully less weight.
My bike is a levo 19 equipped with a 500 Wh battery and the actual weight is 20.9 kg