Dado's latest activity
-
Dado replied to the thread Bafang M510 Firmware thread.Yep, thats Hybridizer. Just a little off comparing to my last picture. Why I pointed out? All M510 FC2.x are coming from factory with... -
Dado replied to the thread Bafang M510 Firmware thread.Hybridizer firmware, or custom firmwares v45.1 or v51.2 (36V).
-
Dado replied to the thread K1 Flash - setup CAN motor parameters, Firmware update (bin files included), Calibration >>> and NEW device: BB Racing.Few new firmwares available. M500 - latest and I guess also last 36V 18A firmwares v55.9, with different battery capacity: 630Wh...
-
-
-
Dado replied to the thread Bafang M510 Firmware thread.Some new custom firmwares have this settings as default. Lowered power at lover PAS to get more range. Would start with these settings.
-
-
Dado replied to the thread Bafang M560.Thast powerfull as DJI and little more. ;) Great motor and not that load as on videos with action cam.
-
Dado replied to the thread Bafang M510 Firmware thread.These are defaults after Vitus firmware flash, you wont see any exponential characteristics in Besst. ;)
-
-
Dado replied to the thread Bafang M510 Firmware thread.Thats good to hear, K1 Flash helped. ;) I had also lowered Support level % on my M560. Seems to me quit powerful on pedalling from...
-
I've have the same bike with the bafang m510 as you zorro77 and i found the power levels as it comes standed very strange... there's a...
-
thank s a lot . Let s go for new m560 . Soon as i receive it i will let you know my feed back .
-
Dado replied to the thread Bafang M560.Yep, you wont find better firmware for M600. It was not a bad motor, just was not pre-set optimally. And all hardcoded. If you looking...
-
Dado replied to the thread Bafang M510 Firmware thread.You can go over Go+ and DPC245 v3 and set max power at each PAS and Acceleration - you just set some values and try on a road if suit...
-
Dado replied to the thread Bafang M560.Boom, and I will add, you wont do anything with this on M600. It is all here hardcoded.
-
Dado replied to the thread Bafang M510 Firmware thread.Good question. I would rather say it is not there such a thing dynamic help. With Vitus firmware characteristics I saw this curve bent...
-
-
This firmware is on 52V
