offroad's latest activity

Some frames have a second 36v JST (red) female socket alongside the 6v JST female light connector. Socket is marked "batt V". The...

Probably a bit late by now, but earlier Giant's used RideControl One / ANT+ as sole protocol from controller to motor. Newer bikes use...

The speed sensor plugs directly into the M100 motor which has a bank of JST sockets which are soldered to the motherboard and then epoxy...

With Giant recently going public on subject 'Ebike Tampering', don't be surprised if the app and updated device firmwares are collecting...

Case secured with 4 x Torx screws underside. Double tab fasteners along both sides centre need leverage to unclick. White rubber...

The case is plastic welded on all 4 sides, no clips to simply open. Use a hobby tool (Dremel) to split the case. Caution: Lots of fine...

Well worn eTrail ! You need to move that speed sensor to the crank (as above) then nobody will get near you on the track ! (Hello...

Finally found my perfect rear rack after a 'global' search spanning months... turns out it was right in my own backyard. NZD60 from...